AkzoNobel Powder Coatings Korea Co. Genuine & OEM spare parts made in Japan, China, Korea and Europe for Maritime, Oil & Gas Industry.
Contact us if you are looking for Anticorrosive Marine Coatings Interpon PZ 660 (1x100m) / Interpon 810 (1x180m) marine equipment and ship spare parts.
Equipment: Anticorrosive Marine Coatings
Manufacturer: AkzoNobel Powder Coatings Korea Co.
Type / Model / Part no: Interpon PZ 660 (1x100m) / Interpon 810 (1x180m)
Technical Specification & Spare Parts:
Interpon PZ 660 (1x100m) / Interpon 810 (1x180m) Anticorrosive Marine Coatings AkzoNobel Powder Coatings Korea Co.
Cathodic Protection & Protective Coating,
Anticorrosive Marine Coatings,
Anticorrosive Marine Coatings,
Interpon PZ 660 (1×100µm) / Interpon 810 (1×180µm) Description oft the coating system, tested on bare steel: ? Interpon PZ 660 powder coating primer containing zinc ? Interpon 810 powder coating The tested coating system is not defined in NORSOK M-501 and therefore not in accordance with the Standard. The testing has been performed with basis in test requirements of NORSOK M-501 (for Coating system no. 1, for protection of carbon steel with maximum operating temperature < 120 °C; for structural steel and exteriors of equipment, vessels, piping and valves (not insulated. This does not indicate that the coating system is accepted as an alternative of the system specified in NORSOK M-501. Due to the nature of the coating (powder coating requiring curing at elevated temperatures), the test of recoat after exposure has not been performed (ref. Table 1 in NORSOK M-501, Rev. 6, February 2012; Supplementary requirements clause 3: Overcoatable without mechanical treatment obtaining minimum adhesion of 5.0 MPa). Coating system no. 1 is defined in NORSOK M-501, Surface preparation and protective coating, Rev. 6, February 2012, as a minimum of 3 coats, 1st layer a zinc rich primer and a total DFT of min. 280 ?m.,
Contact our Customer Care Center today for quotations and orders.
Shipcare+ Japan
[email protected]
www.shipcare.jp