WEIDMUELLER INTERFACE GMBH & CO. KG Genuine & OEM spare parts made in Japan, China, Korea and Europe for Maritime, Oil & Gas Industry.
Contact us if you are looking for Fire Doors WDF-M9 Class A-60 Single Leaf Hinged Fire Door marine equipment and ship spare parts.
Equipment: Fire Doors
Manufacturer: WEIDMUELLER INTERFACE GMBH & CO. KG
Type / Model / Part no: WDF-M9 Class A-60 Single Leaf Hinged Fire Door
Technical Specification & Spare Parts:
WDF-M9 Class A-60 Single Leaf Hinged Fire Door Fire Doors WEIDMUELLER INTERFACE GMBH & CO. KG
fire Protection – Partitions & outfits,
Fire Doors,
Fire Doors,
"WDF-M9 Class A-60 Single Leaf Hinged Fire Door". The door leaf consists of: – Face sheet I: 1 mm thick galvanised steel sheet – Fireboard I: 10 mm thick inorganic fireproof board of YB type (nominal density 1100 kg/m³) manufactured by Suzhou Youlian Ship Fitting Co., Ltd. – Insulating core: 20 mm thick TG-2 type ceramic wool (nominal density 170 kg/m³) manufactured by Yixing Marine Insulation Material Factory – Fireboard II: 10 mm thick inorganic fireproof board of YB type (nominal density 1100 kg/m³) manufactured by Suzhou Youlian Ship Fitting Co., Ltd. – Face sheet II: 1 mm thick galvanised steel sheet One layer of aluminium alloy profile is covered at the edge of door leaf, at where two continuous grooves of specifications 30 mm x 4.5 mm and 13.5 mm x 3.5 mm were arranged for the fixing of fireproof seal tapes (manufactured by Shanghai Jiar Fu Decoration Material Company Ltd.), with one at the end face of the profile at the perimeter of door leaf and the other at the exposed face of the profile all around door leaf. The door leaf is reinforced inside with three pieces of 2000 mm x 50 mm x 20 mm inorganic fireproof boards longitudinally. The door leaf is connected to the frame by 4 stainless steel hinges at one of its vertical edge and is fitted with marine fireproof door lock at the other edge. The door frame is made by 1.5 mm and 2 mm thick steel plate and is filled inside with ceramic wool insulating material of type TG-2 (nominal density 170 kg/m³) manufactured by Yixing Marine Insulation Material Factory. The door was tested with the door frame fixed to the bulkhead with bolts (acc. to the test report) and is also approved for use with door frames both bolted, tack- and fully welded to the bulkhead. Total thickness of door leaf: 50 mm.,
Contact our Customer Care Center today for quotations and orders.
Shipcare+ Japan
[email protected]
www.shipcare.jp
