ADVANCED INSULATION KOREA Genuine & OEM spare parts made in Japan, China, Korea and Europe for Maritime, Oil & Gas Industry.
Contact us if you are looking for Fire Protection Materials ContraFlex Passive Fire Protection Jackets – Jet Fire PFP System marine equipment and ship spare parts.
Equipment: Fire Protection Materials
Manufacturer: ADVANCED INSULATION KOREA
Type / Model / Part no: ContraFlex Passive Fire Protection Jackets – Jet Fire PFP System
Technical Specification & Spare Parts:
ContraFlex Passive Fire Protection Jackets – Jet Fire PFP System Fire Protection Materials ADVANCED INSULATION KOREA
fire Protection – Partitions & outfits,
Fire Protection Materials,
Fire Protection Materials,
Installation is to be as per the jet fire exposure tests performed on a Tubular Section (Hp/A = 85/m)Specimen, fitted with a "ContraFlex" flexible fire resistant insulation jacket. After 60 minutes and 120 minutes, the integrity was maintained as required and designed, and the classification of J60 and J120 respectively achieved., Starting from the outer surface the jacket consisted of: , – a silicone coated class cloth; stainless steel (SS) mesh; , – a first layer of 25 mm thickness of Alkaline Earth Silicate (AES) wool; , – a first thin layer of aluminum foil; a second layer of 25 mm thickness of AES wool; , – a second thin layer of aluminum foil; a third layer of 25 mm thickness of AES wool; , – a third thin layer of aluminum foil and a final layer of silicone coated glass cloth. , The jacket was then compressed to an overall thickness of 61mm., Suitable approved insulation is to be applied to any other part of the protected fire exposed surface not covered by the jacket, in all cases. Attention is to be paid to means of securing jacket boundaries and the prevention of heat bridging: an overlap of at least 150mm should be provided between two systems.,
Hydrocarbon Jet Fire Resistance (ISO 22899-1:2007) J-Rating | Length of Test: 120:35 minutes | Average Flow: 0.302 0.002 kg/s | Mass of Propane: 2185.6 kg | Temperature resistance from -50 C to 1100 C | Thickness 61 mm | For tubular specimen, a temperature rise for assembly section: | 30 C after 15 minutes | 64.1 C after 30 minutes | 97.4 C after 45 minutes | 144.3 C after 60 minutes | 225.4 C after 90 minutes | 302 C after 120 minutes | Blast Overpressure Resistance 2.15 bar,
ISO 22899-1:2007 "Determination of the Resistance to Jet Fires of Passive Fire Protection Materials, Part 1: General Requirements",
Contact our Customer Care Center today for quotations and orders.
Shipcare+ Japan
[email protected]
www.shipcare.jp
