3C Metal Middle East FZE Genuine & OEM spare parts made in Japan, China, Korea and Europe for Maritime, Oil & Gas Industry.
Contact us if you are looking for Packings, Seal and Gasket Material 24SH, 30SH, TF1570, TF1574, TF1580, TF1590, NA1002, NA1005, NA1006, NA1100, NA1122, SWG 913/913M marine equipment and ship spare parts.
Equipment: Packings, Seal and Gasket Material
Manufacturer: 3C Metal Middle East FZE
Type / Model / Part no: 24SH, 30SH, TF1570, TF1574, TF1580, TF1590, NA1002, NA1005, NA1006, NA1100, NA1122, SWG 913/913M
Technical Specification & Spare Parts:
24SH, 30SH, TF1570, TF1574, TF1580, TF1590, NA1002, NA1005, NA1006, NA1100, NA1122, SWG 913/913M Packings, Seal and Gasket Material 3C Metal Middle East FZE
Seals, Glands & gaskets,
Packings, Seal and Gasket Material,
Packings, Seal and Gasket Material,
24SH is a large gasket sheet produced from 100% pure, multi-directionally expanded PTFE., 30SH is a large gasket sheet produced from 100% pure, multi-directionally expanded PTFE., TF1570 and TF1574 are structured PTFE – Gasket – Sheet produced from virgin PTFE resin filled with hollow glass micro spheres., TF1580 is a structured PTFE – Gasket – Sheet and produced from virgin PTFE resin filled with Barium Sulfate., TF1590 is a structured PTFE – Gasket – Sheet and produced from virgin PTFE resin filled with Silica., NA1002 is a compressed non-asbestos jointingsheet material produced from Aramid fibres, bonded with Nitrile rubber (NBR). It is being manufactured by means of a hot calender process under quality control standards which are registered under ISO 9001 certification. , NA1005 is a compressed non-asbestos jointingsheet material produced from Aramid fibres, bonded with Nitrile Rubber (NBR). It is being manufactured by means of a hot calender process under quality control standards which are registered under ISO 9001 certification. , NA1006 is a non-asbestos jointing-sheet material produced from cellulose fibres, bonded with Nitrile rubber (NBR). It is being manufactured by means of a hot calender process under quality control standards, registered and certified under ISO 9001. , NA1100 is a universal jointing sheet with high temperature and pressure resistance, manufactured from graphite and carbon fibre, bonded with Nitrile rubber (NBR). It is manufactured by means of a hot calender process under quality control standards which are registered and certified under ISO 9001. , NA1122 is a compressed non-asbestos sheet gasket material produced from a combination of inorganic fibers, bonded with nitrile rubber (NBR). It is being manufactured by means of a hot calender process under quality control standards which are registered under ISO 9001 certification. , Spiral-Wound Gaskets (SWG) 913/913M are made of a preformed metallic strip and a soft filler material (PTFE or graphite), wound together under pressure, and optionally with an inner and/or outer guide ring. The metal strip holds the filler.,
24SH | Temperature Min./continuous Max.: -240C/270C | Pressure: Max. 200 bar | Color: white | 30SH | Temperature Min./continuous Max.: -268C/260C | Pressure: Max. 200 bar | Color: white | TF1570, T1574 | Temperature Min./Max.: -210C/260C | Pressure: Max. 55 bar | Color: blue | TF1580: | Temperature Min./Max: -210C/260C | Pressure Max.: 83 bar | Color: Off-White | TF1590: | Temperature Min./Max: -210/260C | Pressure Max.: 83 bar | Color: Fawn | NA1002 | Temperature Max./Continuous Max. 400C / 260C | Pressure Max./ Continuous Max: 110 bar / 80 bar | Color: Green | NA1005 | Temperature Max./Continuous Max. 400C / 240C | Pressure Max./ Continuous Max: 110 bar / 50 bar | Color: Blue | NA1006 | Temperature Max./Continuous Max. 450C / 270C | Pressure Max./ Continuous Max: 130 bar / 70 bar | Color: Black | NA1100 | Temperature Max./Continuous Max. 450C / 270C | Pressure Max./ Continuous Max: 130 bar / 70 bar | Color: Black | NA1122 | Temperature Max./Continuous Max. 550C / 430C | Pressure Max./ Continuous Max: 150 bar / 102 bar | Color: Black | Spiral-wound Gaskets (SWG) 913/913M | Max Temperature for PTFE filler material: 260C | Max Temperature for Grafite filler material: 450C | Max Temperature with steam and under inert conditions: 650C,
Contact our Customer Care Center today for quotations and orders.
Shipcare+ Japan
[email protected]
www.shipcare.jp
